Hello would somebody be able to help?
Hi, i currently have a Drayton LP241 hw ch controller. it is set currently to HW - on (to get hot water to the tank when needed) and CH - off (being summer), well the other day the power went off temporarily at our property and since then the HW has not worked at all, boiler not firing up. But if i advance the HW-off, and the the CH-on, and put the thermostat up to max (30) i get nothing from the boiler, not firing up, if i then advance the HW-on and the change the CH-off, the boiler then fires for about 2-3 minutes, but no longer. Is the controller knackered?
HW = On / CH = Off (nothing), then HW = Off / CH = On (nothing), then HW = On / CH = Off (fires for about 2 mins).
this doing my head in, as our shower runs off the hot and cold water system, so my morning shower is cold, and i have no hot water at all (brrrrr)
thanks in advance
Hi, i currently have a Drayton LP241 hw ch controller. it is set currently to HW - on (to get hot water to the tank when needed) and CH - off (being summer), well the other day the power went off temporarily at our property and since then the HW has not worked at all, boiler not firing up. But if i advance the HW-off, and the the CH-on, and put the thermostat up to max (30) i get nothing from the boiler, not firing up, if i then advance the HW-on and the change the CH-off, the boiler then fires for about 2-3 minutes, but no longer. Is the controller knackered?
HW = On / CH = Off (nothing), then HW = Off / CH = On (nothing), then HW = On / CH = Off (fires for about 2 mins).
this doing my head in, as our shower runs off the hot and cold water system, so my morning shower is cold, and i have no hot water at all (brrrrr)
thanks in advance