Hi,
we have a Halstead combi boiler purchased from Wickes which was installed approx 14 years ago.
We recently noticed a very small puddle on the work bench under the boiler. The water is dripping from a small hose (about pencil thickness) hanging out about 1 inch under the centre of the boiler. Approx 1 drip per hour.
Any idea why its doing this?
Incidentally, Halstead have been amazing with after service help.
When the boiler was approx 8 years old it went off. Holstead told me over the phone how to reset the boiler within minutes.
Then 2 years ago, the 12 year old boiler needed a new diaghrapm. Our plumber said the part would be approx £150.00 to purchase + £70.00 labour to fit.
We phoned Holstead ourselves and Halstead posted us a new diaghragm free of charge within 48 hours!
The disgruntled plumber could only charge £70.00 fitting.
Anyway, any advice about the dripping hose would be appreciated.
we have a Halstead combi boiler purchased from Wickes which was installed approx 14 years ago.
We recently noticed a very small puddle on the work bench under the boiler. The water is dripping from a small hose (about pencil thickness) hanging out about 1 inch under the centre of the boiler. Approx 1 drip per hour.
Any idea why its doing this?
Incidentally, Halstead have been amazing with after service help.
When the boiler was approx 8 years old it went off. Holstead told me over the phone how to reset the boiler within minutes.
Then 2 years ago, the 12 year old boiler needed a new diaghrapm. Our plumber said the part would be approx £150.00 to purchase + £70.00 labour to fit.
We phoned Holstead ourselves and Halstead posted us a new diaghragm free of charge within 48 hours!
The disgruntled plumber could only charge £70.00 fitting.
Anyway, any advice about the dripping hose would be appreciated.