EPDM Flashing

[anorakdiyer71]

I have a "classic bond' once piece EPDM roof

I need to install an Ubbink extract ventilator through the roof.

The base of this ventilator kit has a EPDM flange- Looks as if is supposed to be heat welded
Can I seal / fix this any other way on the existing EPDM without using heat??

 

[Notch7]

Uncured tape + primer.

example

External Corner Patch Uncured Tape (225mm x 300mm)

Uncured formable EPDM for waterproofing external corners and profiles/cuts in the membrane. You will also require ClassicBond Rubber Primer and a...

www.roofgiant.com

 

[anorakdiyer71]

 

[anorakdiyer71]

This flange though this needs to stick to the EPDM?

 

[robinbanks]

Perhaps notch meant to link https://www.roofgiant.com/classicbond-epdm/9-inch-elastoform-uncured-epdm-tape/