Expander Outputs programming

[Tas452]

Hi

I have managed to set up a Texecom powered 8xp expander on a Premier 24, all working fine so far after months of trying to get round to do it. I need to relocate a bell box and connect it to the outputs of the expander, but not sure about the connections to the expander from the bell box and also programming the outputs for a bell box. I have had a look at the installation manual but cant get my head round it.

Any help would be brilliant.

Thanks

 

[sparkymarka]

I normally program exp output 1 ….bell output
2 …..strobe
Expander input ( at the bottom ) bell tamper
And use + off the expander …

 

[Tas452]

Thanks for you help, will try the above