I am replacing a small section of a wooden window frame (about 10 inches) I have copied the part quite accurately but wondering about the left and right sides should I pack the sides with 2 part filler then insert the `new part` to get a good seal before painting.
As it stands the gap would be approx 1 mm either side but I could widen that if better for the filler to adhere.
I also read sawdust & wood glue as an alternative.
Suggestions?
As it stands the gap would be approx 1 mm either side but I could widen that if better for the filler to adhere.
I also read sawdust & wood glue as an alternative.
Suggestions?