Fault- Whirlpool ADG 7560 Dishwasher

[wynprice]

Hi I have a problem with my dishwasher- it goes through the wash cycle but then towards the end it beeps on and off continuously and the front lights flash 3 times in a consecutive cycle I guess indicating and F3 fault??

It appears that the rinse cycle has not worked at this stage also. Any help would be welcome.]
Cheers

 

[zipper]

F3 indicates a fault on the heater system. It could be the heater itself (should measure around 25 ohms), an NTC sensor fault, heater relay on the PCB, or a break or lose connection in the heater circuit wiring.

 

[wynprice]

Many thanks for the prompt advice here. Most appreciated.