Having problems with my hot water - sometimes when I put the HW on, the black plastic lever sticking out the top of the actuator (BGMVSP-2) doesn't move across so the valve doesn't open and the HW doesn't come on. However, if i apply some pressure to the lever, it moves across and the HW comes on. It seems to be quite random whether the lever moves across automatically or not.
Does this sound like its just the actuator that needs replacing? If so, from what I've read, I think it should be a fairly easy job to replace it if I buy like for like? Just a case of attaching the new one and wiring like for like?
From another thread, I believe this one is compatible:
http://www.heatingcontrolsonline.co.uk/acl-drayton-invensys-za5-actuator-p-111.html
Grateful for any advice.
Thanks.
Does this sound like its just the actuator that needs replacing? If so, from what I've read, I think it should be a fairly easy job to replace it if I buy like for like? Just a case of attaching the new one and wiring like for like?
From another thread, I believe this one is compatible:
http://www.heatingcontrolsonline.co.uk/acl-drayton-invensys-za5-actuator-p-111.html
Grateful for any advice.
Thanks.
