- Joined
- 8 Nov 2024
- Messages
- 26
- Reaction score
- 2
- Country

I've had the electricians in recently doing a full house rewire. I have been filling the other chases around the house gradually, but this one running into the main board has got me a bit stumped.
It's a brick party wall, depth of about 40mm and 170mm wide. There isn't much play in any of the wires or conduits, and most of them won't sit inside the chase at the bottom if you get my drift.
Likewise at the top i think some of the cables probably cut across the square with the ceiling. Ultimately this area isn't going to be on display but i'd like to make it as neat as poss.
Cheers
It's a brick party wall, depth of about 40mm and 170mm wide. There isn't much play in any of the wires or conduits, and most of them won't sit inside the chase at the bottom if you get my drift.
Likewise at the top i think some of the cables probably cut across the square with the ceiling. Ultimately this area isn't going to be on display but i'd like to make it as neat as poss.
Cheers
