Is their any reason why you can't run the cable outside the house rather than under the floor boards as the fuse box is at the other end of the house compared to the kitchen. The oven I have currently got does not need a 6mm cable so I now need to fit one.
fitting a new oven
- Thread starter mikejohnsimmons
- Start date
- Joined
- 19 Jan 2005
- Messages
- 1,171
- Reaction score
- 41
- Country
No but it will need to be protected from damage eg run in plastic conduit fixed to the wall or alternatively a 'protected' cable such as steel wired armoured
SB
SB
- Joined
- 27 Jan 2008
- Messages
- 27,738
- Reaction score
- 3,364
- Location
- Llanfair Caereinion, Nr Welshpool
- Country
My parents have a 10mm SWA cable powering a sub-main for the kitchen which not only powers cooker but whole of kitchen using a mini consumer unit and RCBO's and is handy as now the trips can be accessed by my disabled mother.
Using SWA there was no need for RCD protection at the main consumer unit as far as the kitchen went.
Using SWA there was no need for RCD protection at the main consumer unit as far as the kitchen went.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
