Fitting Ventilation Ducts

[Twofingertyper]

After a rather long delay (and a quick fix that has held surprisingly well) I now have a clear bit of time to switch over a broken duct into a new one (only Manrose).

However, I have never done this before - it looks like they're attached with zip ties? Is it that simple? Is there a brand/style of zip ties that are used?

 

[foxhole]

Yes that simple but they can slip off, gaffer tape or better foil tape can add to security .

 

[bobasd]

if your talkin about connectin twwo lengths of 100mm manrose ducting then you dont tape them you use the custom manrose 100mm connector fittin.

 

[Twofingertyper]

Connecting the hose from the fan to the vent/pipe - when I looked at it it looks like a zip tie fixed directly around the hose?

This is from the bathroom ceiling vent to outside if that makes any difference

 

[foxhole]

Connecting the hose from the fan to the vent/pipe - when I looked at it it looks like a zip tie fixed directly around the hose?

This is from the bathroom ceiling vent to outside if that makes any difference

That’s right , as I stated above .