Hi everyone just got a 6inch liner for from ebay. Just fitted it today but been reading up on them an they have to be fitted with the arrows on the liner pointing up towards the chimney. I could not find any arrows on the liner, i hope i have fitted it the right way up cause it was a tight fit. Does anyone have any advice how i tell if it is the right way or any pictures. Thanks Carl
flexible flue liner
- Thread starter benuover
- Start date
Sponsored Links
There are arrows on the liner, there are indented slightly very close together.
You will need to look hard, as they hardly stand out.
The liner needs to be up the right way.
If you are diy fitting you need to inform bco, and pay their fees, they will need to inspect the works and issue a certificate of compliance.
Best to use a Hetas registered installer, they take care of all that.
You will need to look hard, as they hardly stand out.
The liner needs to be up the right way.
If you are diy fitting you need to inform bco, and pay their fees, they will need to inspect the works and issue a certificate of compliance.
Best to use a Hetas registered installer, they take care of all that.
Every liner is different, mine had the arrows printed on with the manufacturing information.
You can just see the arrow to the right of the date, pointing upwards.
You can just see the arrow to the right of the date, pointing upwards.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
