I have just had a new front door and side panels fitted and have now removed our old door and frame leaving it open to the entrance hall. We quite like the idea of it being open instead of putting doors back in the same place. Note, the door that was removed was the original external front door before a porch extension was build on the front which is where the new door is now.
With this being said I want to carry the flooring in the hallway through to the porch area (tiled area) there is a height difference of around 30mm to the top of the tiles, the flooring is 12mm thickness and the underlay is 5mm. So I'm probably looking at a transisition of 13mm floor to floor. Will a standard threshold bar be ok for this?
Also there are two areas of floor where the was a dwarf brick wall (there used to be windows where the current side panels are) the brick pillars were removed leaving a damaged floor. Will normal sand/cement mix fill this or will I need something better?
With this being said I want to carry the flooring in the hallway through to the porch area (tiled area) there is a height difference of around 30mm to the top of the tiles, the flooring is 12mm thickness and the underlay is 5mm. So I'm probably looking at a transisition of 13mm floor to floor. Will a standard threshold bar be ok for this?
Also there are two areas of floor where the was a dwarf brick wall (there used to be windows where the current side panels are) the brick pillars were removed leaving a damaged floor. Will normal sand/cement mix fill this or will I need something better?