flow switch prob with halstead combi boiler
- Thread starter ablincow
- Start date
which boiler?
More questions to follow, need to home in gradually.
More questions to follow, need to home in gradually.
I don't think there is a flow switch error light on that boiler, please prove me wrong someone?
So if there is only a red lockout light press in hard on the red overheat stat protrusion knob underneath to the left if I remember right, and also reset the pcb by moving power selector switch past off to reset position hold for a while and return to run. Also pehraps cutting power to the boiler alltogether counting to 10 and reinstating power (like rebooting an IBM XT).
Then report back.
So if there is only a red lockout light press in hard on the red overheat stat protrusion knob underneath to the left if I remember right, and also reset the pcb by moving power selector switch past off to reset position hold for a while and return to run. Also pehraps cutting power to the boiler alltogether counting to 10 and reinstating power (like rebooting an IBM XT).
Then report back.
also a favourite with sky "have you turned it off and on again" 
Mr Barker you are correct, there is no flow switch error code or indeed any codes as far as i know, just some grey knobs with ickle bumps on em.
Do as requested and reset, underneath , to front left, red button, very small.
Do as requested and reset, underneath , to front left, red button, very small.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
