Old (1992) Whirlpool ARG 917 built-in. F/F has worked perfectly all those years.
However, today noticed fridge was warm i.e. not cooled. I altered thermostat setting to 5/max.cooling (only the one temperature adjuster inside fridge compartment)..left it a while..made no odds. Fridge light is on and with that single control knob in the fridge you can switch whole machine on/off if you down below "1".
Freezer is fine.
Think this is a cooling panel type fridge ( but panel not visible being behind back wall of fridge..i.e. no fans/ducts blowing cold air from freezer (not a frost-free freezer..too old.)
Any ideas? Thanks for reading
However, today noticed fridge was warm i.e. not cooled. I altered thermostat setting to 5/max.cooling (only the one temperature adjuster inside fridge compartment)..left it a while..made no odds. Fridge light is on and with that single control knob in the fridge you can switch whole machine on/off if you down below "1".
Freezer is fine.
Think this is a cooling panel type fridge ( but panel not visible being behind back wall of fridge..i.e. no fans/ducts blowing cold air from freezer (not a frost-free freezer..too old.)
Any ideas? Thanks for reading