Hi I hope someone is able to advise/help on the following.
I have to install 2 new wall lights that need to be independently switched.
On the same wall there is a socket which is on the ring main, which I need to run a feed from to a new socket 8 feet away, and I understand I have to fit a 13A fused spur next to the existing socket and then feed the new socket.
i.e. Exisitng socket>>>13A FCU>>>new socket.
Could you please advise the best way to take feed from this arrangement to the 2 new light switches? (then obviously onto the lights).
Many thanks in anticipation
I have to install 2 new wall lights that need to be independently switched.
On the same wall there is a socket which is on the ring main, which I need to run a feed from to a new socket 8 feet away, and I understand I have to fit a 13A fused spur next to the existing socket and then feed the new socket.
i.e. Exisitng socket>>>13A FCU>>>new socket.
Could you please advise the best way to take feed from this arrangement to the 2 new light switches? (then obviously onto the lights).
Many thanks in anticipation