Galaxy Aqua 4000 8.5kW shower problem

[tongey]

Hi Guys,

If i turn the shower on using the LOW or COLD button the shower works, If i turn the shower on using the HIGH button it starts and immediately switches itself off. If i turn the shower on using the LOW button and leave the shower running for a few minutes and then press the HIGH button it is fine.

I have just changed the pressure switch assembly but this has made no difference.

Can anybody help me???

Thanks in advance. Karl.

 

[petertheplumber12]

As long as the water pressure going into is ok then it sounds like the temperature control thermostat is faulty. if replaceable try canging that 1st otherwise its the pcb I reckon. javascript:emoticon('')

 

[tongey]

Hi Peter,

Thanks for the reply, I will have a look to see if the temp control thermostate is replaceable.

Regards
Karl

 

[seco services]

Check the button on the pcb by removing the cover and operate the button by hand it's poss it may not be latching properly.

 

[wadsen]

Hello
I am experiencing the same problem and saw your post on this blog. Did the suggested advise work or how did you resolve the problem