Glowworm 30cxi boiler - water running out /filling tap

Joined
8 Mar 2011
Messages
2
Reaction score
0
Location
Yorkshire
Country
United Kingdom
hi my boiler cut out today due to low pressure, so following the instructions on the front i turned the filling tap, however when i do this water pours out on underneath of the left side of the boiler, is this normal? however when i did this eventually the pressure returns to the correct level.

any help would be appreciated as you might have guessed i havnt a clue! lol

cheers sara x
 
This is a very common fault. The bit thats leaking is part of the built in filling loop a brass disconnector. If its pouring out then maybe replacement is the best bet. If its just a drip sometimes they will stop. The connections have changed recently from the plastic elbow being screwed in to a push fit. Filling loop is part number 2000802600
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top