I have about 5m2 of 3inch square floor tiles to lay, in the dry(er) parts of my bathroom. They are billed as marble, though I would say closer to limestone, and have a very open texture, with cavities and voids as part of the stone character. I'm hoping this will also give me a good non slip surface.
When it comes to grouting, I don't want to fill all the stone texture with grout.
I'm assuming I'll be able to find readymix grout in cartridges, and gun it into the joints as 'pointing', and then out with the surgical glove and wet finger! No joy yet on grout cartridges on t'internet, though.
any leads/recommendations? (chipboard substrate on joists at 16inch centres)
Failing that, I'm contemplating using an icing bag. Seriously!
any better ideas?
many thanks
pie
When it comes to grouting, I don't want to fill all the stone texture with grout.
I'm assuming I'll be able to find readymix grout in cartridges, and gun it into the joints as 'pointing', and then out with the surgical glove and wet finger! No joy yet on grout cartridges on t'internet, though.
any leads/recommendations? (chipboard substrate on joists at 16inch centres)
Failing that, I'm contemplating using an icing bag. Seriously!
any better ideas?
many thanks
pie