Hello - are there wall brackets for heated towel rails that allow for the heated pipe to be slightly lower than where the hole has been drilled into the wall?
I have seen brackets that swivel left and right to accommodate curved towel rails but nothing that swivels up and down slightly.
Unfortunately in my rental flat the holes have been drilled out of step with the spacing of pipes on the towel rail. I guess they didn’t want to drill into the middle of a tile. To adjust for that they used brackets with a rubbery knob at the end, but this is not suitable for the heat and has started cracking. I would like to replace with proper brackets that can withstand the heat, but they need to clasp rails which are a little lower than the hole in the wall.
Thanks for any advice!
I have seen brackets that swivel left and right to accommodate curved towel rails but nothing that swivels up and down slightly.
Unfortunately in my rental flat the holes have been drilled out of step with the spacing of pipes on the towel rail. I guess they didn’t want to drill into the middle of a tile. To adjust for that they used brackets with a rubbery knob at the end, but this is not suitable for the heat and has started cracking. I would like to replace with proper brackets that can withstand the heat, but they need to clasp rails which are a little lower than the hole in the wall.
Thanks for any advice!