I have a 'new' heating system incorporating a Glow-Worm 30sxi combi.
This system has failed consistantly since October 2007; never operating for more than 14 days without failure due to pressure loss.
I constantly refill the system to 1.4bar but within 10-14 days it drops to .8 and below then fails.
Glow-Worm recently replaced the electric circuit board and a pump within the boiler; all the radiators were tightened; this has not solved the failure issues.
The pressure goes up as well as down to a leak which we cannot find may not be the answer.
Any ideas??
This system has failed consistantly since October 2007; never operating for more than 14 days without failure due to pressure loss.
I constantly refill the system to 1.4bar but within 10-14 days it drops to .8 and below then fails.
Glow-Worm recently replaced the electric circuit board and a pump within the boiler; all the radiators were tightened; this has not solved the failure issues.
The pressure goes up as well as down to a leak which we cannot find may not be the answer.
Any ideas??
