Some of you may remeber but I recently replaced my Danfoss Randall RMT230 thermsotat with a Honeywell CM907 programmeable thermostat. I wired it up correctly (so i thought) but the other morning i noticed the radiators were hot, when only the hot water was on, the thermostat was only set at 5.
The programmeable thermostat is connected to the programmer (Danfoss CP715). My programmeable thermostat is set at 5 degrees overnight and when we are out (raising it in the morning). The heating on the programmer is constantly set to on. The hot water is on a timer.
Can anyone help?
Thanks
The programmeable thermostat is connected to the programmer (Danfoss CP715). My programmeable thermostat is set at 5 degrees overnight and when we are out (raising it in the morning). The heating on the programmer is constantly set to on. The hot water is on a timer.
Can anyone help?
Thanks