heatslave 20/25

Joined
23 Sep 2007
Messages
1
Reaction score
0
Location
Cornwall
Country
United Kingdom
hi there... novice here :)

my 20/25 boiler has stopped firing up. i reset the thermostat, and the power light is the only light on there.

if i switch it off at the mains for a while, it will then fire up until i run the hot tap.

could it be the circulating pump?

any advice welcome

regards
Martyn
 
Sponsored Links
You're best to follow your user instructions if you have any.
Check there is adequate pressure in the boiler first. If you've had to re-set the o/heat stat the boiler may be dry.
 
are you sure it was the manaul reset for the boiler stat you touched? underneath control panel.? or the lockout button.?
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top