Hive TRV - adaptor needed?

[oxfordmark]

Hey

I just got some Hive TRV’s and realise my current valve is a Caleffi, can anyone confirm this and does anyone know where I can get adaptors from?

 

[CountryFan]

Do an internet search for Hive TRV adapters/Amazon

 

[ericmark]

My programmable TRV heads came with a range of different options, M30 x 1.5mm seems the standard, but it will work on others

an example shown, also some makes are better than others, I have three makes fitted, two auto set the operating travel and one actually reports if too much or too little, odd the one which does not was the most expensive, the Energenie.

Hive shows

as options. This picture is from Tado

again it shows a selection of adaptors which come with the head, it say on Hive advert

Your Hive Radiator Valves come with the two most common valve body adaptors and other adaptors are available free of charge from Hive.

And This guide seems to show most options

 

[oxfordmark]

My programmable TRV heads came with a range of different options, M30 x 1.5mm seems the standard, but it will work on others View attachment 364385 an example shown, also View attachment 364386 some makes are better than others, I have three makes fitted, two auto set the operating travel and one actually reports if too much or too little, odd the one which does not was the most expensive, the Energenie.

Hive shows View attachment 364387as options. This picture is from Tado View attachment 364388 again it shows a selection of adaptors which come with the head, it say on Hive advert And This guide seems to show most options

When I tried to thread the trv onto the adaptor it didn’t seems to go on easily, like something was stopping it. So thought it was perhaps the adaptor being wrong for the valve.

 

[ericmark]

When I tried to thread the trv onto the adaptor it didn’t seems to go on easily, like something was stopping it. So thought it was perhaps the adaptor being wrong for the valve.

Set the valve head cold so plunger is retracted, think that's right way around, mine have a setting procedure to retract the plunger fully, maybe Hive does also, not used Hive.