Hi, just looking for some advice really.
I am installing a Honeywell 2-44 panel with 10 PIR's (double balanced) and 8 door contacts.
The installation manual is not clear on the internal speaker and external bell box wiring.
The manual states - "The Galaxy 2 Series has four on-board outputs all on RIO 0; Bells, Strobe, Speaker and Set."
Rio 0 is on the left of the panel addressed 1001-1004
however the rest of the connections are on the right (Self Actuated Bell connections)
I have connected-
Bell+ on the panel to V+ on the sounder
0v on the panel to V- on the sounder
T on the panel to TR- on the sounder
My question is Where do I connect the S- and ST- (I originally connected ST- to rio 0,3 on the left with the S- to the 0v on that zone)
Should they be-
S- on the sounder connected to the image of the Bell on the SAB connection (at panel)
and ST- on the sounder to the image of a light on the SAB connection (at panel)
Please can anyone let me know.
I am installing a Honeywell 2-44 panel with 10 PIR's (double balanced) and 8 door contacts.
The installation manual is not clear on the internal speaker and external bell box wiring.
The manual states - "The Galaxy 2 Series has four on-board outputs all on RIO 0; Bells, Strobe, Speaker and Set."
Rio 0 is on the left of the panel addressed 1001-1004
however the rest of the connections are on the right (Self Actuated Bell connections)
I have connected-
Bell+ on the panel to V+ on the sounder
0v on the panel to V- on the sounder
T on the panel to TR- on the sounder
My question is Where do I connect the S- and ST- (I originally connected ST- to rio 0,3 on the left with the S- to the 0v on that zone)
Should they be-
S- on the sounder connected to the image of the Bell on the SAB connection (at panel)
and ST- on the sounder to the image of a light on the SAB connection (at panel)
Please can anyone let me know.