honeywell 2-44 sounder wiring

[toney]

Hi, just looking for some advice really.

I am installing a Honeywell 2-44 panel with 10 PIR's (double balanced) and 8 door contacts.

The installation manual is not clear on the internal speaker and external bell box wiring.

The manual states - "The Galaxy 2 Series has four on-board outputs all on RIO 0; Bells, Strobe, Speaker and Set."

Rio 0 is on the left of the panel addressed 1001-1004

however the rest of the connections are on the right (Self Actuated Bell connections)

I have connected-
Bell+ on the panel to V+ on the sounder
0v on the panel to V- on the sounder
T on the panel to TR- on the sounder
My question is Where do I connect the S- and ST- (I originally connected ST- to rio 0,3 on the left with the S- to the 0v on that zone)

Should they be-
S- on the sounder connected to the image of the Bell on the SAB connection (at panel)
and ST- on the sounder to the image of a light on the SAB connection (at panel)

Please can anyone let me know.

 

[socdesign]

As per PM, yes that's correct. The manual you are reading is talking about the G2-44, G2-12, G2-20. You have a G2-44+.