i cannot get the central heating to work in auto mode on the valve. the hot water is ok but the only way to get the heating to work is to put the valve to manual position. i have changed the synchron motor twice but this has not helped. anyone got any ideas.
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
honeywell 4073 synchronous 3 port valve
- Thread starter eyeballroy
- Start date
You need to prove the valve is moving beyond the mid position to the CH only position. If it does move as it should, you know it's not a wiring problem and you know it's not a stiff spindle.
That then leaves the other common problem , 'faulty micro switch'.
which prevents power leaving through the valves 'orange' wire to fire up the boiler. Changing the actuator head will then be the easy cure.
That then leaves the other common problem , 'faulty micro switch'.
which prevents power leaving through the valves 'orange' wire to fire up the boiler. Changing the actuator head will then be the easy cure.
N
namsag
THere is a little board inside the valve head that burns out , if you have changed motor and still not working new head or complete valve req.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
