Blimey, this is driving me nuts!
Basically, in the last few days the hot tap for the mixer on the bath has gone stiff, so now it siezes after about 1 rotation - so theres simply not enough hot water coming out to have a shower. I would presume a dodgy washer, or simply a good clean/descale of the components is required, however I can't figure out how to undo the tap!
I get as far as you can see in the phots, but I can't work out how to remove the rotating top assembly (with the cross shaped bars) to get at the brass nut underneath.
Something simple? Hopefully. I need to get this fixed because I'm starting to smell!
Thanks in advance
Basically, in the last few days the hot tap for the mixer on the bath has gone stiff, so now it siezes after about 1 rotation - so theres simply not enough hot water coming out to have a shower. I would presume a dodgy washer, or simply a good clean/descale of the components is required, however I can't figure out how to undo the tap!
I get as far as you can see in the phots, but I can't work out how to remove the rotating top assembly (with the cross shaped bars) to get at the brass nut underneath.
Something simple? Hopefully. I need to get this fixed because I'm starting to smell!
Thanks in advance