1. Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.
    Dismiss Notice

Hotpoint Aquarius FDM550 PR stops mid wash cycle no lights

Discussion in 'Appliances' started by Freddrick, 17 May 2020.

  1. Freddrick

    Freddrick

    Joined:
    17 May 2020
    Messages:
    1
    Thanks Received:
    0
    Country:
    United Kingdom
    Hi we have an intermittent issue with our dishwasher

    Occasionally it will start as it should but stops during the wash part of the cycle and the lights go out. If it makes it to the drying part of the cycle then it always finishes.

    Sometimes when you power on and press start - all the lights go out. The only way to get it going again is to open the door and give the door a "wiggle" and then shut it again which makes the lights come on! Then the start button normally works. Sometimes you need to do the door wiggle more than once.

    On very rare occasions, it works as it should first time.

    Any suggestions would be welcome.

    Thanks
     
  2. Sponsored Links
Loading...

Share This Page