Power on, led on.
Attempt to select program fails.
Delay held causes led to extinguish but not inputs allowed.
Apparently normal operation is for an led to flash at this switch on point, this is not lit.
The dishwasher has recently been moved, worked before, doesnt now.
All connectors are seated correctly.
Any ideas?
Attempt to select program fails.
Delay held causes led to extinguish but not inputs allowed.
Apparently normal operation is for an led to flash at this switch on point, this is not lit.
The dishwasher has recently been moved, worked before, doesnt now.
All connectors are seated correctly.
Any ideas?
