My son has a Hotpoint Aquarius super silent WD640 and when spin is selected the motor/drum rotates at the normal speed and not at spin speed. There are no fault lights showing and the pump is clear and running correctly there being no water left in the machine. I have checked the motor connections, circuit board and wiring and can see no obvious faults. Has anyone got any ideas what else I could check or maybe what the resistance readings should be though the motor windings. There are 7 connections to the motor on the main plug these being,
1 red
2 red
3 purple
4 grey
5 white
6 grey
7 grey
6 and 7 are looped together all the other wires go to the motor windings.
Thanks for looking.
1 red
2 red
3 purple
4 grey
5 white
6 grey
7 grey
6 and 7 are looped together all the other wires go to the motor windings.
Thanks for looking.