- Joined
- 26 Apr 2017
- Messages
- 12
- Reaction score
- 0
- Country
Not sure if I'm fighting a lost cause but wondered if anyone could give us any advice.
Recently repaired our quite old condenser dryer(new heating element) and all has been working fine. Today the wife said he was spluttering and that it stopped. Had a look at it and the drums not turning at all and no hum from motor. All I here is a clicking sound from the board. Took the top and side off and belt is fine.
Does it sound like the motors gone or could it be a capicitor etc?
Any advice appreciated.
Recently repaired our quite old condenser dryer(new heating element) and all has been working fine. Today the wife said he was spluttering and that it stopped. Had a look at it and the drums not turning at all and no hum from motor. All I here is a clicking sound from the board. Took the top and side off and belt is fine.
Does it sound like the motors gone or could it be a capicitor etc?
Any advice appreciated.