Hotpoint CTD80 Turning off

Joined
10 Oct 2008
Messages
1
Reaction score
0
Location
Tyne and Wear
Country
United Kingdom
This has just started to happen a little after the 12months guarantee has run out :shock:

After about 10-15mins the dryer will turn its self off, the screen and the blue on light go out for around 5-10 seconds then the screen will flash on/off a few times and i can hear the sound of a relay or an electrical short. The screen has no fault indication and after a few flashes, comes back on with the time remaining. I can then set it away again but it will soon turn its self off again.
I thought it was over heating so i've given it a very good clean and its all spotless.

My wife has said it used to flash the fault code F10 so it could be the stat needs reset, but now it doesnt show any fault. Is it worth resetting the stat anyway just to see if it works?
 
could be one of 2 things ,dodgy plug socket or faulty lcd screen put plug in another socket and try that first :wink:
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top