washer is leaking loads of water when dry cycle starts. Any advice? Cheers
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
hotpoint washer dryer
- Thread starter doctorellis
- Start date
B
breezer
would help to know where water comes from
Appears to be coming from a white tubular spout at the back and on the top of the machine. A black cap covered this. Comes straight from the cold water in pipe- Only pours out when drying cycle commences.
The little white tube you describe is the water feed going into the condensor for the dry cycle. The water should be contained in the outer black section.
Thanks for that. Is there any way i can regulate the ammount of water coming through as it appears to be gushing through the spout. Even with the cover on it pours through the top after a few seconds and there doesn't appear to be a blockage down the thick black pipe that leads to the drum.
- Joined
- 2 Apr 2006
- Messages
- 1,896
- Reaction score
- 29
- Country
The water inlet valve has a restrictor in it. No way of adjusting.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
