i have a hotpoint wf340 and a rat eat though the water supply pipe changed the supply pipe. now when i turn it back on the on/off light has a fast flash and the wash enhance light flashes slower.
hotpoint washing michine
- Thread starter karlturner
- Start date
Sponsored Links
i dont have a clue lol
first thing would be to assume its related to something you have done or the rat has done
i would have all panels off looking for damage with the machine unplugged of course
now if you are saying the the water is slower filling than before it can be a restriction in the flow like stop cock/valve not fully open if its the 1/4 turn sort then make sure its parallel with the hose or fully wound open if its a stop cock
if that dosn't work turn the water off remove the hose and look for anything restricting flow
blow into the hose [after cleaning the surface and running water through it]
first thing would be to assume its related to something you have done or the rat has done
i would have all panels off looking for damage with the machine unplugged of course
now if you are saying the the water is slower filling than before it can be a restriction in the flow like stop cock/valve not fully open if its the 1/4 turn sort then make sure its parallel with the hose or fully wound open if its a stop cock
if that dosn't work turn the water off remove the hose and look for anything restricting flow
blow into the hose [after cleaning the surface and running water through it]
thanks for the quick repy big all.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
