Washer stopped in cycle. All the bottom row of lights on the front panel were flashing and the spin and door lock lights on the right of the front panel remained on. after managing to remove water, door lock light is now off. any idea what i can try?
Hotpoint WDL540G(UK)C Fault.
- Thread starter snazza2
- Start date
Hi,
Thanks for response. Can not find any restriction in pump pre chamber. Tested pump in situ with fly lead to 240v supply and it pumps out water ok.
Just tried spin only cycle and machine started cycle but stopped a few minutes in withDoor Lock light (1) , Dry light (3)and Spin light (4) on continuously.
Lights on right of user panel numbered from bottom up.
Thanks for response. Can not find any restriction in pump pre chamber. Tested pump in situ with fly lead to 240v supply and it pumps out water ok.
Just tried spin only cycle and machine started cycle but stopped a few minutes in withDoor Lock light (1) , Dry light (3)and Spin light (4) on continuously.
Lights on right of user panel numbered from bottom up.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
