Hotpoint WF320G - Wont go into final spin

[sarahadrian78]

HI.. My hotpoint WF320 washing machine will not go into final spin. The wash enhance and on/off lights flashes. The washer goes through the wash as normal, completes rinse and spin but as soon as the final rinse starts the drum stops spinning. We have checked the waste water pump, cleaned all the pipes, checked the brushes and they are fine, checked the pressure sw, it seams ok when you blow into it?? I am now at a loss.............please help!!1 Thank you in advance!!!

 

[rocks1]

f01 light 4, motor triac
f02 light 3 motor, jammed/ tacho
f03 lights 3&4 Ntc fault
f04 light 2. pressure sw stuck on empty
f05 lights 2&4, pressure sw stuck on full
f06 lights 2&3, N/A?
f07 lights 2&3&4 heater relay
f08 light 1. heater relay
f09 lights 1&4 eprom/setup error
f10 lights 1&3, pressure switch not sensing
f11 lights 1&3&4, pump/draining error
f12 lights 1&2, communication error
f13 lights 1&2&4, dryer ntc/ fan motor
f14 lights 1&2&3, dryer heater
f15 lights 1&2&3&4, dryer heater relay
f16 N/A
f17 light 4, door lock
f18 light 3 comms error (3 phase motor) power board