Hotpoint WF560

[crazy1]

lights are flashing and water is running even when stitched off ( machine not filling water just goes in then out the waste pipe)

any ideas

ima stumpped

Dave

 

[Sleepyhead]

lights are flashing and water is running even when stitched off ( machine not filling water just goes in then out the waste pipe)

any ideas

ima stumpped

Dave

Lights are flashing really tells us nothing as we can't see them. Describe the layout and which lights are flashing. (eg. 5 lights running top to bottom, 1 and 4 flashing).

If it's filling through the inlet valves with the power off then the inlet valves are stuck open.
Going straight out again with power off would indicate syphoning.

 

[crazy1]

its the on/off button that is flashing

then there are 5 lights in a row and the top 2 are flashing- reduce creases
- wash enhance
pressing them does nothing

not sure whats my next step ive looked for blockages and the usual stuff

i reakon the inlets are stuck open too ,, but figure advice is the best way before i dismantle

Thanks

Dave

 

[Diyisfun]

Have a look here
http://www.hotpointservice.co.uk/hs/pages/index.do

THere are faults codes listed or you can email them.

 

[crazy1]

yeah mate looked there .... and sent them emails they are getting back to me ,,,,,,,

thanks for help

David