Below are inside and outside pictures of my door.
Please could someone tell me how to get the external handle off the door.
I need to do this because the replacement anti-snap cylinder that I have bought will not go past the handle due to it having hardened grip defenders as seen in the second picture. All the "how to fit the Anti-Snap Euro Profile cylinder" videos are with an external handle that has visible screws.
There are no visible screws on my door handle (internal or external).
I have tried to remove the black plastic pieces at the top and bottom of the internal and external handle with the cylinder removed but can only get them up/down by about 1cm. Moving the black plastic pieces leads me to be able to move the outside handle up and down by about 1cm.
It must be possible to remove my door handle - I just don't know how to do it !
Thanks in anticipation.
Please could someone tell me how to get the external handle off the door.
I need to do this because the replacement anti-snap cylinder that I have bought will not go past the handle due to it having hardened grip defenders as seen in the second picture. All the "how to fit the Anti-Snap Euro Profile cylinder" videos are with an external handle that has visible screws.
There are no visible screws on my door handle (internal or external).
I have tried to remove the black plastic pieces at the top and bottom of the internal and external handle with the cylinder removed but can only get them up/down by about 1cm. Moving the black plastic pieces leads me to be able to move the outside handle up and down by about 1cm.
It must be possible to remove my door handle - I just don't know how to do it !
Thanks in anticipation.