Hi, I have new Mylife, Pro Ryver Exposed shoer fitted approx. 2 months ago. The temperature of the hot water is supposed to range from 38C to 45C, however mine is calibrated to approx. 33C to 38C. I have a copy of a PDF guide on how to calibrate the shower but mine isn't listed. On the right-side I have button which you can override to turn up to the maximum. When you rotate this valve to the coldest setting their is a plastic cap which can be removed.
I have watched YouTube videos on how to calibrate other manufacturers, but the Mylife Shower valve is not listed.
I would appreciate if anyone can help on how I remove this end valve to try and calibrate. I had no problems with my old shower with regards to the temperature of the water.
I have my Combi Worchester Bosch gas Boiler set to 50C
I have watched YouTube videos on how to calibrate other manufacturers, but the Mylife Shower valve is not listed.
I would appreciate if anyone can help on how I remove this end valve to try and calibrate. I had no problems with my old shower with regards to the temperature of the water.
I have my Combi Worchester Bosch gas Boiler set to 50C
