How to change tap water flow?
- Thread starter adamt11
- Start date
Sponsored Links
Is it gravity feed?
Andy
Andy
- Joined
- 29 May 2018
- Messages
- 68
- Reaction score
- 7
- Country
Looks like a mixer tap.
The hot runs through the middle of the tap and the cold around the outside. In essence a double walled pipe.
This is why the hot is thinner and more central.
It probably coming out faster as the pipe is smaller think thumb over hose pupe
The hot runs through the middle of the tap and the cold around the outside. In essence a double walled pipe.
This is why the hot is thinner and more central.
It probably coming out faster as the pipe is smaller think thumb over hose pupe
Sponsored Links
You could try a diffuser/aerator - screws on the end of the tap and "swirls" the water and mixes it with air. Actually a water saving device but they "slow" the water down and make it frothy. I fitted them when we changed from gravity to mains pressure hot water as I didn't like the way it blasted out of the tap.
If you Google water saving devices most water companies will give you them free.
If you Google water saving devices most water companies will give you them free.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
