How to open this yellow push fit elbow

Joined
16 Dec 2025
Messages
4
Reaction score
0
Country
United Kingdom
Hi guys, quick question before I attempt to renew this yellow elbow whist I have access following the replacement of a different style elbow further along which just needed unscrewing and pulling off. Is this simple to take off? I'm thinking a small flat head in that slot to pull away the white bit away from the yellow bit and then I can pull the connector off? Or is it more tricky or requires a special tool?

Thanks.
IMG_5559.jpg
 
Hard to tell, not something I've seen before that I recall. You could try your suggestion, but may have to renew it, as not all are demountable.
 
So I'm going to renew it with a JG speedfit elbow, but I don't want to mess about with it and get stuck trying to take it off and cause damage and not be able to turn the water back on!
 
I've had those in the past, it wasn't originally yellow. IIRC they used to come with white, blue and red end caps. This was when the collar was just an exposed ring

You can ping those caps off with very gentle pressure from a small flat-head screwdriver

Regards

Tet
 
Is it leaking?
Not this specific one, but elsewhere in the house there was a similar one that leaked last year, plumber fixed that issue. You're probably going to advise me to leave it alone. Whilst I have the ceiling cut, I thought I would upgrade the fittings to new one, for the sake of it.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top