-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
How to remove mira riser rail , no screws visable
- Thread starter ShowerWoe
- Start date
Should be Allen key access to concealed screw from holes below wall bracket.?
Looks that way: allen screw hidden within that clearance hole https://www.plumbnation.co.uk/documents/mira-beat-installation-instructions.pdf
In the instructions you linked to, it uses m4 screws. I'm not seeing a screw in the hole. It's smooth.
How do I get to the screw (if there is one)
They are referred to on the diagram as
and need an Allen (hex shaped) key (shown in the picture at the bottom bracket) to insert in hole and find said hex socket to unscrew it. One was probably supplied in the original fixings kit.
and need an Allen (hex shaped) key (shown in the picture at the bottom bracket) to insert in hole and find said hex socket to unscrew it. One was probably supplied in the original fixings kit.
I have a set of allen keys but they won't go in the 'hole' because they is something smooth in the way. There is no hexagonal indent to get purchase
My plumber got involved: "the bit where you thought there should be an Allen key head is a button. Push the head in and pull the square section away from the wall slightly, repeat with the top bracket and the whole rail can be removed. Replacing is just lining top and bottom of the rail on to the wall fixings and push. They will click back into place
Hope this helps some one else
Hope this helps some one else
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
