- Joined
- 6 Feb 2021
- Messages
- 1
- Reaction score
- 0
- Country
I have a valiant Ecomax running hot and then cold.
Running water slowly will keep the water warm
How can I test the flow switch..it has three wires
red, black and green
red and black show constant voltage of 4.73 DC
black and green show constant 57 ohms irrespective of the hot water tap being turned on or off ...
somehow this dosent seem right ?
appreciate any feedback
pump and heat exchanger are good
Running water slowly will keep the water warm
How can I test the flow switch..it has three wires
red, black and green
red and black show constant voltage of 4.73 DC
black and green show constant 57 ohms irrespective of the hot water tap being turned on or off ...
somehow this dosent seem right ?
appreciate any feedback
pump and heat exchanger are good
Last edited:
