I need a solution for these 2 problems

Joined
5 Dec 2005
Messages
238
Reaction score
19
Location
Leicestershire
Country
United Kingdom
I am going to be tiling this will in a bathroom, but have a couple of issues first.

There is this crack
SP_A0043.jpg

and this gaping hole, suggestions greatly appreciated for both.
SP_A0042.jpg
 
The hole can be bricked up with no problem, but the crack could be due to a more serious fault........is this crack on the external wall too?
 
Hmm i will have to have a look at the old pictures prior to re-rendering, i don't think it is on the external wall as well, but it could be.

I will be sand/cementing it when i work out what the heck that means, and wether or not i am capable of getting a flat enough finish for big tiles. I would suggest not.

So what sort if mix should i be using to replace the bricks???

Cheers
Lee
 
aren't you going to do something about the falling-down-wall first :?
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top