I Have an Ideal Classic RS240 Boiler, the Gas Solenoid Valve is starting to chatter so its on its way out. (its been in 5+ years since i moved in )
The original instruction manual says the Gas valve should be a Honeywell V4600A-1122
But the valve in the boiler is a Honeywell V4600E-1032
I have found the Manual and the the valves are as follows
A=Fast Opening With Regulator
B=Fast Opening Without Regulator
C=Softlite Opening With Regulator
D=Softlite Opening Without Regulator
E=Fast Opening With Throttle Valve
So now in Confused Why would it have be changed form an "A to an "E" ? Should i put an "A" Back in it ?
The only other differences i can see is the electrical connector, but that's not really an issue.
Can any of these valves be used in this boiler ? what are the differences in the valves ?
Any Help would be much appreciated !
Thanks
The original instruction manual says the Gas valve should be a Honeywell V4600A-1122
But the valve in the boiler is a Honeywell V4600E-1032
I have found the Manual and the the valves are as follows
A=Fast Opening With Regulator
B=Fast Opening Without Regulator
C=Softlite Opening With Regulator
D=Softlite Opening Without Regulator
E=Fast Opening With Throttle Valve
So now in Confused Why would it have be changed form an "A to an "E" ? Should i put an "A" Back in it ?
The only other differences i can see is the electrical connector, but that's not really an issue.
Can any of these valves be used in this boiler ? what are the differences in the valves ?
Any Help would be much appreciated !
Thanks