I have just had some building work done and a few more lights installed.
This means that my 5 amp lighting circuit is drawing about 4.9amps and blows sometimes when all lights are on.
There are only 2 rings into the fuse and no room to move one to another fuse (not easily).
Simple solution would be to increase the fuse from 5 to 10 amps (There is no 6amp in the Wylex NB range). Can the wires handle this or is it a bad idea to do?
Thanks,
Charles.
This means that my 5 amp lighting circuit is drawing about 4.9amps and blows sometimes when all lights are on.
There are only 2 rings into the fuse and no room to move one to another fuse (not easily).
Simple solution would be to increase the fuse from 5 to 10 amps (There is no 6amp in the Wylex NB range). Can the wires handle this or is it a bad idea to do?
Thanks,
Charles.