• Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.

Indesit WD125 Not Draining Properly?

Joined
28 Oct 2006
Messages
1
Reaction score
0
Location
Tyne and Wear
Country
United Kingdom
Hi people!
My Indesit WD125 is not draining correctly.
I checked then end of the hose for blockages but not any.
I put the hose in a bucket and put the washing machine on a 30 degree wash and when it came to drain the water flew out for the first 2 seconds then went to a trickle, a noise kicked in (buzzing) sounding as if the pump was blocked, then machine then stopped after around 3 minutes of attempting to drain to click around and flash (When stopped water still inside machine at bottom).
When i put my machine on a spin however i got a full bucket of water and spin cycle went correctly.

Any suggestions please? Do you think the pump is blocked?
I dont have the instructions also!

Thanks. :)
 
Probably blocked filter.

Possibly blocked drain hose or blocked pump.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top