Indesit WI101 Error Code 3 Flashes

[crash2000]

Hi All,

Our washing machine stopped working.
If you select a program, the light will flash 3 times very quicky. So quickly it could be 2 or 4 flashes.
The light then remains on and nothing happens. (You do hear the door lock)
If we switch off, move the dial to the reset line, switch on, the light flashes again, the same number of times as above and then the light reverts to flashing once every second and continues even once the door has unlocked.

Anyone any ideas?

Thanks
Mark

 

[jj4091]

Not sure if this is relevant but worth a look //www.diynot.com/forums/viewtopic.php?t=165031

 

[crash2000]

Thanks JJ, will try these and let you know.

 

[rocks1]

--------------------------------------------------------------------------------

Indesit WIDL Codes

See also Hotpoint WF & some WD, left hand lights from top to bottom or digital display.(next page)

widl codes - light flashing from left to right are numbers 1-4

f01 light 4, motor triac
f02 light 3 motor, jammed/ tacho
f03 lights 3&4 Ntc fault
f04 light 2. pressure sw stuck on empty
f05 lights 2&4, pressure sw stuck on full
f06 lights 2&3, N/A?
f07 lights 2&3&4 heater relay
f08 light 1. heater relay
f09 lights 1&4 eprom/setup error
f10 lights 1&3, pressure switch not sensing
f11 lights 1&3&4, pump/draining error
f12 lights 1&2, communication error
f13 lights 1&2&4, dryer ntc/ fan motor
f14 lights 1&2&3, dryer heater
f15 lights 1&2&3&4, dryer heater relay
f16 N/A
f17 light 4, door lock
f18 light 3 comms error (3 phase motor) power board

f1 and f17 share the same light

 

[crash2000]

Thanks for the code list. Thats great.
I left the machine unplugged overnight, switched it on this morning and it seemd to have fixed itself.
I ran an empty wool cycle and it failed again with a clear 2 Flash error.
So am now looking into it again against the relovant flash code.
I will post result.

Thanks
Mark