Indesit WIXXE167 grrrrr

[Leccy758]

I got an indesit WIXXE167 that shows F08 fault during the spin part of the wash.
Disconnected the heater and fitted a lamp to check and see what happened, it went onto heat cycle (Lamp lit), finished then added 10 mins and tried to heat again (lamp lit). then continues with wash showing no errors.

PCB already been swapped out. It does not happen every wash but when it does happen all washes after that show fault.

 

[rocks1]

I'd say faulty heater if the pcb has been changed. They do bring up weird faults when the heater goes wrong have you changed thermistor

 

[Leccy758]

looking at changing heater and thermister tomorrow if we got one that will do, limited on this type at the mo (checked out ok when heated and at set resistances).

The thing heats and most of the time we see the F08 fault is when it is on spin at the end or after the rinse.

It really got daft today though when no fault showed despite the heater being disconnected.