Induction hob electrics

[tg2115]

Hi
First time ever used a advice forum so don't be too brutal.. Just trying to wire a Cookology induction hob and any help would be appreciated.
The Cable is already connected to the hob there are 4 wires BU/BK/BN/GRN
Question is do i simply put BN/BK in the live terminal of the 45v cooker switch socket.
Blue in Neutral green in Earth.Is it that simple or much more complicated.
The cable from the consumer box is 6mm with a 32V RCD.
Thanks for your advice in advance.

 

[jj4091]

I'm not sure what the regulations say but I think it would be better if you linked the 2 live terminals at the hob & replaced the 4 core with a 3 core so there is no confusion in future.

 

[winston1]

Hi
First time ever used a advice forum so don't be too brutal.. Just trying to wire a Cookology induction hob and any help would be appreciated.
The Cable is already connected to the hob there are 4 wires BU/BK/BN/GRN
Question is do i simply put BN/BK in the live terminal of the 45v cooker switch socket.
Blue in Neutral green in Earth.Is it that simple or much more complicated.
The cable from the consumer box is 6mm with a 32V RCD.
Thanks for your advice in advance.

Assuming the black and brown are two lives that is the way to do it. Have you looked at the instructions?

 

[tg2115]

Thanks for the advice guy's 2 good comments, yes connected up with BN/BK to live contact all working fine.